Omron CRT1 - 10-2009, Operation Manual

Page: 530 / 675

506
Functions of Digital I/O Slave Units
Section 11-3
device with vertical-drop overcurrent protection characteristics is used, use
one with a rating of 100 W min.
Monitoring Status
with the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Go online, right-click the icon of the applicable CompoNet Slave Unit in the
Network Configuration Window, and select
Monitor .
3. Make sure that the External Load Short-circuit Protection Check Box is se-
lected.
4. Click the Close Button. The window will close.