Omron CRT1 - 10-2009, Operation Manual

Page: 617 / 675

593
CompoNet Explicit Messages
Appendix A
End Code
The FINS communications end code is returned. For details, refer to the SYSMAC CS/CJ/CP-series and SYS-
MAC One NSJ-series Communications Commands Reference Manual (Cat. No. W342).
16FF Object does not exist The specified Instance ID is not supported.
15FF Too much data The data is larger than the specified size.
13FF Not enough data The data is smaller than the specified size.
0CFF Object state conflict The specified command cannot be executed due to an internal error.
20FF Invalid parameter The specified operation command data is not supported.
0EFF Attribute not settable An Attribute ID supported only for reading has been executed for a
write service code.
10FF Device state conflict The specified command cannot be executed due to an internal error.
14FF Attribute not supported The specified Attribute is not supported.
19FF Store operation failure The data cannot be stored in memory.
Response code Error name Cause