Omron CRT1 - 10-2009, Operation Manual

Page: 11 / 675

xi
About this Manual:
This manual describes the installation and operation of the CompoNet Slave Units, and the Repeater
Unit and includes the sections described below.
Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate a CompoNet Slave Unit or Repeater Unit. Be sure to read the precau-
tions provided in the following section. Also be sure to read the
CompoNet Master Unit Operation Man-
ual (see following table) together with this manual.
Precautions provide general precautions for using the CompoNet Slave Units, Repeater Units, Pro-
grammable Controller, and related devices.
Section 1 introduces the CompoNet Slave Units and the various models that are available.
Section 2 describes the configurations of CompoNet Networks.
Section 3 describes how to install and wire a CompoNet Network.
Section 4 provides the basic specifications of the Slave Units.
Section 5 describes the Digital I/O Slave Units.
Section 6 describes the Analog I/O Slave Units.
Section 7 describes the Temperature Input Units.
Section 8 describes the Expansion Units.
Section 9 describes the Bit Slave Units.
Section 10 describes the Repeater Unit.
Section 11 individually describes the functions provided by CompoNet Slave Unit. The functions are
divided into those supported by all CompoNet Slave Units and those supported only by specific Com-
poNet Slave Units.
Section 12 provides troubleshooting information that can be used in the event a problem occurs in
CompoNet Slave Unit operation. It also provides information on maintenance that should be performed
to ensure optimum application of the CompoNet Slave Units.
The Appendices provide specialized information, including information on CompoNet explicit mes-
sages, object mounting, connectable devices, current consumption, and precautions for connecting
two-wire DC sensors.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.