Omron CRT1 - 10-2009, Operation Manual

Page: 513 / 675

489
Functions Common to All Slave Units
Section 11-2
Note The Unit Conduction Time Monitor Function adds up the time the
CompoNet Slave Unit network power supply is ON. The time when
the power is OFF is not included.
Settings Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select
Parameters - Edit from the pop-up menu.)
3. Click the General Tab. Enter the desired value in the Unit Conduction Time
Threshold Field.
4. Click the Transfer [PC to Unit] Button to download the data, and then click
the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
CompoNet network
Slave Unit
Total ON time
Total ON time
ON
OFF
Stored in Slave Unit
memory
Internal circuit
power supply