Omron CRT1 - 10-2009, Operation Manual

Page: 131 / 675

107
Connecting External I/O for Slave Units
Section 3-6
■
Connecting Loose Wires to Devices
The following table shows the Cables available when the Slave Unit has a MIL
connector and the other device has loose wires. Use these Cables as needed.
The following table shows the MIL connector pin numbers, loose wire colors,
dot markings, and dot colors.
20 Pins (G79-A
@@@
C)
Three-tier with common terminal XW2E
Screw-less clamp terminals XW2F
e-CON connector XW2N
Type Series
Slave model MIL Cable model Remarks
CRT1-V @ D16ML 20 pins G79-A200C (2 m)
G79-A500C (5 m)
Loose wire size: AWG24
Loose wires are cut.
G79-Y100C (1 m)
G79-Y150C (1.5 m)
G79-Y200C (2 m)
G79-Y300C (3 m)
G79-Y500C (5 m)
Forked terminals are attached to the loose
wires.
Forked terminal: 161071-M2
(Nippon Terminal)
CRT1-V @ D32ML 40 pins G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m)
Loose wire size: AWG28
Loose wires are cut.
G79-Y100C-D1 (1 m)
G79-Y200C-D1 (2 m)
G79-Y500C-D1 (5 m)
Forked terminals are attached to the loose
wires.
Forked terminal: 161071-M2
(Nippon Terminal)
CRT1-VDA02ML 10 pins Indicated cable is not available
CRT1-VAD04ML 16 pins
Pin No. Wire color Dots Dot color Pin No. Wire color Dots Dot color
20 Light brown
„
Black 10 Light brown
„„
Black
19 Red 9 Red
18 Yellow Black 8 Yellow Black
17 Red 7 Red
16 Light green Black 6 Light green Black
15 Red 5 Red
14 Gray Black 4 Gray Black
13 Red 3 Red
12 White Black 2 White Black
11 Red 1 Red