Omron CRT1 - 10-2009, Operation Manual

Page: 102 / 675

78
Connecting Cables and Terminating Resistor
Section 3-4
Using Flat Cable II Attach a DCN5-BR4 Flat Connector Plug to the DCN5-TR4 Flat Connector
Socket connected to Communications Cable.
■ Installation Method
Place the Flat Connector Plug so that the white line on the cable is facing
downward and press in the Connector until it clicks into place.
Note To remove a Connector once it has been attached, press in firmly
on the latches on both sides of the front of the Connector and pull
it out.
Multidrop Connections
Using Round Cable I/II The DCN4-TB4 Open Type Connector is used to convert the communications
connector on the Slave Unit or Repeater Unit to a terminal block (M3) for con-
necting the cable wires.
Example: Round cable I
Flat Connector Socket
Flat Connector Plug
Slave Unit
M3 terminal block
Open Connector
Slave Unit/Repeater Unit
Communications connector