120
Status Areas
Section 5-1
5-1
Status Areas
A Digital I/O Slave Unit has two internal status areas: the Warning Status
Area and the Alarm Status Area. The status flags in these areas are turned
ON and OFF based on the threshold values set by the user for each function
in that Unit.
When any of the bits in the status area of the slaves connected to the Master
Unit turns ON, the corresponding bit (bit 12 is for warning status area notices
and bit 13 is for alarm area notices) of the status flag in the Master Unit turns
ON.
The Digital I/O Slave Unit's status area information can be read by using the
CX-Integrator or explicit messages.
Warning Status Area
The Digital I/O Slave Unit's Warning Status Area contains the following
16 bits. These bits indicate minor errors in the Unit.
Digital I/O Slave Unit
Master Unit
Transmitted
to Master Unit
The Digital I/O Slave Unit has two status areas:
the Warning Status Area and the Alarm Status Area.
The status bit detection allocated to the master is OR of all
slaves
Bit
Content
Description
0
Reserved
---
1
Reserved
---
2
Network Power Voltage Drop Flag
OFF: Normal
ON: Error (Voltage dropped below
threshold.)
Monitors the voltage set as the
threshold for the network power volt-
age monitor function.
3
Unit Maintenance Flag
OFF: Normal
ON: Error (Threshold exceeded.)
Monitors the power ON time warning
value set as the threshold for the Unit
Conduction Time Monitor function.
4
Reserved
---
5
Reserved
---
6
Reserved
---
7
Reserved
---
8
Operation Time Monitor Flag
OFF: Normal
ON: Error (Threshold exceeded.)
Turns ON when the threshold set for
the operation time monitor function is
exceeded.
9
Connected Device Maintenance Flag
OFF: Normal
ON: Error (Threshold exceeded.)
Turns ON when the threshold set for
the contact operation monitor func-
tion or the total ON time monitor func-
tion is exceeded.
10
Reserved
---
11
Reserved
---
12
Reserved
---
13
Reserved
---
Summary of Contents for CRT1 - 10-2009
