92
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
9
If necessary (see
Step 2
), move the files from the old renamed
content-repo
directory to the
new
content-repo
directory.
This copies the files to the hard drive that you have selected for your new content repository.
7.9 Removing a Satellite Device
You can remove any Satellite from the Management Zone that is listed in the Server Hierarchy
panel. When you remove a Satellite, the roles of this device are removed, but the device is still a
managed device in your ZENworks Management Zone.
For more information about deleting a Primary Server, see
Section 6.6, “Deleting a ZENworks
Primary Server,” on page 76
.
1
In ZENworks Control Center, click the Configuration tab. In the Server Hierarchy section,
select the check box next to the Satellite device that you want to delete.
2
Click
Action
>
Remove Satellite Server
.
3
Confirm that you want to completely delete the server, then click
OK
.
7.10 Refreshing a Satellite
You can refresh a device so that any pending actions take place immediately.
1
Select the check box next to the Satellite that you want to refresh.
2
Click
Action
>
Refresh Device
.
The QuickTask Status box is displayed while the action is in progress.
3
(Optional) To close the status dialog box, click
Hide
.
The refresh action continues in the background.
4
(Optional) To cancel the refresh action, click the check box for the device, click
Stop
, then click
Hide
to close the dialog box.
7.11 Troubleshooting Satellites
The following section provides solutions to the problems you might encounter while working with
Satellites:
“Unable to add a Satellite with the Imaging role to a Windows managed device by using the
zman ssc command” on page 93
“Unable to remove a Satellite with the Imaging role from a Windows device by using the zman
ssd command” on page 93
“The managed device is not promoted to the Imaging Satellite role even though the role has
been assigned to it” on page 93
“Updated Imaging statistics are not displayed on the ZENworks icon when a Windows Vista
SP2 managed device is promoted to be a Satellite with the Imaging role” on page 93
“Editing the Content Replication schedule that is set to “No Schedule” results in Null Pointer
Exception if the ZENworks database is running on Oracle” on page 94
