308
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2
Enter the target database type as Oracle.
3
Enter the IP address or host name of the Oracle database server.
You must specify the IP address or host name of the Oracle database server used while
migrating the database. For example, if you had specified the IP address of the database server
while migrating the database, then you must specify the same IP address while resuming the
database migration. You cannot specify the host name of the database server.
4
Enter the port used by the Oracle database server.
5
Enter the fully qualified net service name for the Oracle database.
6
Choose to use an existing schema.
7
Enter the schema name when prompted for the database username specified before stopping the
database migration.
8
Enter the database schema password when prompted for the database user's password specified
before stopping the database migration.
9
Choose to resume the database migration.
The database migration starts.
10
After the database is successfully migrated, continue with
Section 34.6.3, “Post-Migration
Tasks,” on page 308
.
34.6.3 Post-Migration Tasks
If there is only one server in the Management Zone, all ZENworks services are automatically started
after the data is successfully migrated to an Oracle database.
If there are multiple servers in the Management Zone:
1
On the device where you ran the migration utility, copy the following files to the appropriate
directory on all the servers:
zdm.xml
dmaccounts.properties
dmmappings.properties
The files are located in the
ZENworks_installation_path
\conf\datamodel
directory on
Windows and in the
/etc/opt/novell/zenworks/datamodel
directory on Linux.
2
Restart the ZENworks services.
On Windows:
Do the following:
1. From the Windows desktop
Start
menu, click
Settings
>
Control Panel
.
2. Double-click
Administrative Tools
>
Services
.
3. Start the following services:
Novell ZENworks Server
,
Novell ZENworks Services
Monitor
, and
Novell ZENworks Agent Service
.
On Linux:
At the console prompt, enter the following commands:
/etc/init.d/./novell-zenmntr restart
/etc/init.d/./novell-zenserver restart
/etc/init.d/./novell-zenloader restart
