Content Replication
29
243
n
ov
do
cx (e
n)
16
Ap
ril 20
10
29
Content Replication
When you add a bundle or policy that contains files, the files are uploaded to the content repository
on the ZENworks
®
Server. In addition, the ZENworks database is updated to reflect the addition of
the bundle or policy and its content.
ZENworks Servers and Satellite devices, collectively referred to as content servers, periodically
read the ZENworks database to discover new bundles and policies. Each content server that does not
have the bundle or policy content retrieves it from the content server where it resides.
There are a variety of settings you can use to control how content is replicated among content
servers in your zone.
Content Replication settings can be inherited from the following locations:
(System):
The bundle is inheriting the setting established for the Management Zone
(
Configuration
tab >
Management Zone Settings > Content > Content Replication
).
Folder
:
The bundle is inheriting the setting established for one of its parent folders.
Device
:
The bundle is not inheriting the setting, but the setting is configured directly on the
bundle.
---:
The bundle is not inheriting the setting and the setting is not configured directly on the
bundle. In other words, the setting is not configured at the system level, the folder level, or the
bundle level.
If the settings are configured at the system or folder level, click
Override settings
to enable you to
configure the setting at the bundle, policy, or folder level.
If you are configuring settings on a bundle folder or policy folder, you can click
Force Inheritance
in
the
Folder Task
list in the left navigation pane to ensure that all children (all subfolders as well as
individual bundles and policies) inherit the settings.
Content replication settings let you:
Specify whether content is replicated to new content servers by default.
Manually include content on or exclude content from content servers.
Schedule how often replication occurs.
Set a limit, or throttle, on the maximum amount of content that is replicated per second from
one content server to another.
Specify whether you want the ZENworks Agent on managed devices or Satellite devices to use
checksum comparison to help ensure that no errors were introduced during content replication
and that the content was not altered.
For information about performing these tasks, see the following sections:
Section 29.1, “Configuring Content Replication at the Management Zone Level,” on page 244
Section 29.2, “Replicating Content to New Content Servers,” on page 245
