Configuring Message Logger Settings
38
343
n
ov
do
cx (e
n)
16
Ap
ril 20
10
38
Configuring Message Logger
Settings
The following sections provide information on configuring the settings of the Message Logger
component of Novell
®
ZENworks
®
10 Configuration Management.
Section 38.1, “Configuring the Message Logger Settings at the Zone Level,” on page 343
Section 38.2, “Configuring the Message Logger Settings at the Folder Level,” on page 347
Section 38.3, “Configuring the Message Logger Settings at the Device Level,” on page 347
Section 38.4, “Turning on the Debug Messages,” on page 347
38.1 Configuring the Message Logger Settings at
the Zone Level
The following sections contain information to help you configure the settings in the Management
Zone to enable message logging:
Section 38.1.1, “Local Device Logging,” on page 343
Section 38.1.2, “Centralized Message Logging,” on page 344
38.1.1 Local Device Logging
In ZENworks Control Center, the Local Device Logging page lets you configure the message
logging to a local drive and the system log file of the managed device.
1
In ZENworks Control Center, click
Configuration
.
2
In the Management Zone Settings panel, click
Device Management
, then click
Local Device
Logging.
3
Configure the following options in the Local File panel:
Log Message to a Local File if Severity Is:
Choose from one of the following:
Error:
Stores messages with a severity of Error.
Warning and Above:
Stores messages with a severity of Warning and Error.
Information and Above:
Stores messages with a severity of Information, Warning, and
Error.
Debug and Above:
Stores messages with a severity of Debug, Information, Warning, and
Error.
If you need to troubleshoot a ZENworks Adaptive Agent issue on an individual device, you can
change the severity setting so that additional information is logged. On the device, double-click
the icon in the notification area, click
Logging
in the left navigation pane, then select an
option from the
Log Messages if Severity Is
drop-down list.
