132
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
zac reg https://
ZENworks_Server_DNS_name:port_number
For more information about zac, view the zac man page (
man zac
) on the device or see
“
zac(1)
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
This replaces the server certificate in the local cache.
11.3.2 Changing the IP Address of the Primary Server after
Installing ZENworks 10 Configuration Management
If you want to change the IP address of the Primary Server after installing ZENworks 10
Configuration Management SP3, and if the CN of the certificate does not have the IP address
configured, use the following steps to change the IP address of the Primary Server:
NOTE:
This scenario has been tested only on the Windows Primary Server and the embedded
Sybase database. In this setup, the DNS and DHCP servers are configured on the same device.
1
Before changing the IP address of the Primary Server, take a reliable backup of the following
on all the Primary Servers in the Management Zone:
Content-Repo Directory:
The
content-repo
directory is located by default in the
ZENworks_installation_directory
\work
directory on Windows and in the
/var/
opt/novell/zenworks/
on Linux.
Ensure that the
images
directory located within the
content-repo
directory has been
successfully backed up.
Certificate Authority:
For detailed information on how to take a backup of the
Certificate Authority, see
Section 10.3, “Backing Up the Certificate Authority,” on
page 121
.
Embedded Database:
For detailed information on how to take a backup of the embedded
database, see
Section 34.3, “Backing Up the Embedded Sybase SQL Anywhere
Database,” on page 295
.
2
Change the IP address of the Primary Server.
IMPORTANT:
Do not change the DNS name of the server.
3
Ensure that the new IP address of the server is correctly mapped to its existing DNS name on
the DNS server.
4
Restart all the ZENworks services by running the following command at the server’s command
prompt:
novell-zenworks-configure -c Start
By default, all the services are selected. You must select
Restart
as the
Action
.
5
Re-create all the default and custom deployment packages.
Default Deployment Packages:
At the server’s command prompt, enter the following
command:
novell-zenworks-configure -c CreateExtractorPacks -Z
Custom Deployment Packages:
At the server’s command prompt, enter the following
command:
novell-zenworks- configure -c RebuildCustomPacks -Z
