Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

Page: 72 / 374

72 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
The services reside in the
\novell\zenworks\bin
directory on a ZENworks Server. Refer to the
following sections for instructions to help you control the ZENworks services:
Š Section 6.1.1, “Checking the Status of a ZENworks Service,” on page 72
Š
Section 6.1.2, “Starting a ZENworks Service,” on page 72
Š Section 6.1.3, “Stopping a ZENworks Service,” on page 72
6.1.1 Checking the Status of a ZENworks Service
1
On the server, click Start , select Administrative Tools > Services , then review the status of the
services listed in Table 6-1 on page 71 .
6.1.2 Starting a ZENworks Service
1 On the server, click Start , select Administrative Tools > Services .
2 Select the service you want to start (see Table 6-1 on page 71 ), then click Start the service.
The ZENworks services start when the ZENworks Server is booted and should not normally
need to be restarted. If you need to frequently restart the services, ensure that your server
hardware meets the ZENworks minimum requirements. If the server does not have adequate
RAM, ZENworks services might not continue running. For more information, see “
Primary
Server Requirements ” in the ZENworks 10 Configuration Management Installation Guide .
6.1.3 Stopping a ZENworks Service
1 On the server, click Start , then select Administrative Tools > Services .
2 Select the service you want to stop (see Table 6-1 on page 71 ), then click Stop the service.
ZENworks Preboot Service novell-pbserv Used to provide imaging services to a
device. This includes sending and
receiving image files, discovering
assigned Preboot bundles, acting as
session master for multicast imaging,
and so forth.
ZENworks Remote Management nzrwinvnc Used to enable remote management of
the server.
ZENworks Server zenserver Used for communicating with the
ZENworks Agent.
ZENworks Services Monitor zenwatch Used to monitor the status of the
ZENworks services.
ZENworks Imaging Agent ziswin Used to save and restore image-safe
data on the server (as a managed
device). Only runs when launched by the
ZENworks Agent.
Service Service Name Description