230
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
group; you cannot manually add devices to a dynamic group or remove them from a dynamic group.
For more information, see
Dynamic Group Refresh Schedule (../../resources/help/
settings_dynamicgroupschedule.html)
.
Wake-on-LAN:
Configure the number of retry attempts to wake up a device and the time interval
between the retry attempts. For more information, see
Wake-on-LAN (../../resources/help/
settings_wakeonlan.html)
.
Remote Management:
Configure Remote Management settings, which are a set of rules that
determine the behavior or the execution of the Remote Management service on the managed device.
For more information, see
Remote Management (../../resources/help/
settings_sysremotemanagement.html)
.
27.4 Discovery and Deployment Settings
The Discovery and Deployment section contains the following settings:
Advertised Discovery Settings:
Specify how often you want your ZENworks system to attempt to
discover devices on your network that have the ZENworks pre-agent installed. For more
information, see
Advertised Discovery Settings (../../resources/help/
settings_discovery_advertised.html)
.
Discovery:
Control the settings used during the discovery processes, including the maximum
number of discovery requests that can be running at one time and the technologies to use for the
discovery. You can also specify IP and SNMP settings used by the WMI (Windows Management
Instrumentation) and SNMP discovery technologies. For more information, see
Discovery (../../
resources/help/settings_discoverysettings.html)
.
Windows Proxy:
Specify a managed Windows device in your zone to perform discovery and
deployment tasks in place of a ZENworks Server. This is designed primarily to enable ZENworks
Servers running on Linux to offload discovery tasks that use Windows-specific discovery
technologies such as WMI and WinAPI and deployment tasks that involve Windows managed
devices. For more information, see
Windows Proxy (../../resources/help/
settings_winproxysettings.html)
.
27.5 Event and Messaging Settings
The Event and Messaging section contains the following settings:
Centralized Message Logging:
Configure the settings related to message logging performed by the
Primary Server, including automatic message cleanup, e-mail notification, SNMP traps, and UDP
forwarding. For more information, see
Centralized Message Logging (../../resources/help/
settings_syscentralizedlogging.html)
.
SMTP Settings:
Configure the SMTP server for sending the e-mail notifications to ZENworks
administrators. For more information, see
SMTP Settings (../../resources/help/
settings_smtpsettings.html)
.
27.6 Infrastructure Management Settings
The Infrastructure Management section contains the following settings:
