ZENworks 10 Product Licensing
33
285
n
ov
do
cx (e
n)
16
Ap
ril 20
10
33
ZENworks 10 Product Licensing
The ZENworks
®
10 family of products include the following:
ZENworks 10 Configuration Management
ZENworks 10 Asset Management
ZENworks 10 Patch Management
Asset Inventory for UNIX/Linux
All of the products are installed by default. This enables you to activate products by providing a
license key or evaluate products for which you have not purchased a license. You can also deactivate
licensed or evaluation products if you no longer intend to use them.
The following sections provide information on managing the product licenses:
Section 33.1, “Evaluating a Product,” on page 285
Section 33.2, “Extending the Evaluation Period of a Product,” on page 286
Section 33.3, “Activating a Product,” on page 286
Section 33.4, “Deactivating a Product,” on page 286
Section 33.5, “Possible License State Changes,” on page 287
Section 33.6, “Using ZENworks 10 Asset Management with ZENworks 7 Desktop
Management,” on page 288
Section 33.7, “Viewing the Predefined Reports,” on page 288
For other actions that you can perform to view license information, see “
License Commands
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
For information on renewing Patch Management subscription licenses, see “
Renewing a Patch
Management License
” in the
ZENworks 10 Configuration Management Administration Quick Start
.
33.1 Evaluating a Product
1
Log in to the ZENworks Control Center.
2
Click the
Configuration
tab.
3
In the Product Licensing panel, click the product you want to evaluate.
4
In the Product Activation panel, select the
Evaluate/Activate product
option.
5
Select
Use Evaluation
option, then click
Apply
.
6
Click
OK
.
