Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual, Page: 147 / 374

Configuring Adaptive Agent Settings after Deployment 147
n
ov
do
cx (e
n)
16
Ap
ril 20
10
14.2 Configuring Agent Settings on the Device
Folder Level
1 In ZENworks Control Center, click the Devices tab.
2 Click the Servers or Workstations folder.
3 Click Details next to the folder for which you want to configure settings.
4 Click the Settings tab, click Device Management , then click ZENworks Agent .
5
Fill in the fields. For more information, see Section 14.4, “ZENworks Agent Settings,” on
page 148 .
6 Click OK to apply the changes.
14.3 Configuring Agent Settings on the Device
Level
1 In ZENworks Control Center, click the Devices tab.
2 Click the Servers or Workstations folder.
3 Click the device for which you want to configure settings.
4 Click the Settings tab, click Device Management , then click ZENworks Agent .