206
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
On a Linux device, review the following file:
/etc/opt/novell/zenworks/version.txt
13d
Repeat
Step 13a
through
Step 13c
for each test device.
14
(Conditional) If you are receiving e-mail notifications at the completion of the deployment
stages and are ready to begin the next stage, go to the Deployed System Updates panel, then
click
Action
>
Advance to Next Stage
.
15
To deploy another update, repeat from
Step 5
.
22.3 Starting a Pending Stage
The default stage behavior is to automatically advance through the configured stages. However, you
can configure stage behavior for individual stages or for all stages.
The
Start Pending Stage
option is only available if you used the
Advance to Next Stage Manually
and Notify When Complete
option to stop each stage for manual input before continuing, instead of
having the stages complete automatically.
To start a pending stage:
1
In ZENworks Control Center, click
Configuration
in the left pane, then click the
System
Updates
tab.
2
In the Deploying System Updates panel, select the check boxes for an update.
3
Click
Action
>
Start Pending Stage
.
22.4 Rescheduling a Deployment
You cannot reschedule a deployment after it starts:
Section 22.4.1, “Rescheduling a Deployment for the All Stages Status,” on page 206
Section 22.4.2, “Rescheduling a Deployment for the Other Statuses,” on page 206
22.4.1 Rescheduling a Deployment for the All Stages Status
1
Select the check box for an update.
Because all devices do not need to have the update deployed at the same time, you can set
individual deployment schedules for the devices.
2
Click
Action
>
Reschedule Deployment
to open the Redeployment Schedule dialog box.
3
Either click
OK
to accept the default schedule of
Now
, or select
Date Specific
in the
Schedule
Type
field, specify the new date, then click
OK
.
22.4.2 Rescheduling a Deployment for the Other Statuses
1
Select the check box for an update.
2
Click
Action
>
Reschedule Deployment
.
3
In the Status by Device page, select the check box for an update, then click
Reschedule
Deployment
.
4
On the Status by Device page, select one or more devices that are listed in the
Device
column.
