126
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
8c3
In the SQL editor, execute the following SQL command:
commit;
8d
If the database is installed on the same device as that of the first Primary Server, move the
database.
Internal Sybase:
For detailed information on how to move the data from an internal
Sybase database to an external Sybase database, see
Section 34.5, “Moving the Data from
an Embedded Sybase Database to an External Sybase Database,” on page 302
.
External Sybase:
For detailed information on how to move the data from one external
Sybase database to another external Sybase database, see
Section 35.3, “Moving the Data
from One External Sybase Database to another External Sybase Database,” on page 323
.
MS SQL:
For detailed information on how to move the data to a new MS SQL database,
see the MS SQL documentation. Later on, perform the steps described in
Section 35.5,
“Configuring the ZENworks Server to Point to the New MS SQL Database Containing
Data Moved from Another MS SQL Database,” on page 327
.
Oracle:
For detailed information on how to move the data from one Oracle database to
another Oracle database, see the Oracle documentation. Later on, perform the steps
described in
Section 35.6, “Configuring the ZENworks Server to Point to the New Oracle
Database Containing Data Moved from Another Oracle Database,” on page 328
.
9
Remove all Satellites under the first Primary Server from the Server Hierarchy.
For more information on how to remove the Satellites from the Server Hierarchy listing in
ZENworks Control Center, see
Section 7.4, “Removing Satellites from the Server Hierarchy,”
on page 88
.
10
Retire the first Primary Server by entering one of the following commands at the second
Primary Server prompt:
zman zsret
first_primary_server_object_name
or
zman zenserver-retire
first_primary_server_object_name
For more information about zman, view the zman man page (
man zman
) on the server or see
“
zman(1)
”in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
11
After ensuring that all the operations in the Management Zone are working as expected,
uninstall ZENworks 10 Configuration Management on the first Primary Server.
For detailed information on how to uninstall ZENworks 10 Configuration Management, see
“
Uninstalling ZENworks Software
” in the
ZENworks 10 Configuration Management
Installation Guide
.
11.2 Replacing an Existing Primary Server with a
New Primary Server
If you have only one Primary Server in the Management Zone and if you want to replace the device
hosting the Primary Server with a new device that has the same hostname and IP address as the old
device, you must move the Primary Server to the new device.
The existing Primary Server and the new Primary Server must have the same version of the
ZENworks 10 Configuration Management installed.
