Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

Page: 93 / 374

Satellites 93
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Unable to add a Satellite with the Imaging role to a Windows managed device by
using the zman ssc command
Source: ZENworks 10 Configuration Management; Satellite.
Action: To promote a Windows managed device to be a Satellite with the Imaging role,
use the
zman ssaimg
command.
For more information about the
zman ssaimg
command, view the zman man
page (
man zman
) on the ZENworks Server or see “ Satellite Commands ” in the
ZENworks 10 Configuration Management Command Line Utilities Reference .
Unable to remove a Satellite with the Imaging role from a Windows device by using
the zman ssd command
Source: ZENworks 10 Configuration Management; Satellite.
Action: To remove the Imaging Satellite role from a Windows managed device, use the
zman ssrimg
command.
This command does not remove other Satellite roles such as Content or
Collection if they are assigned to the device.
For more information about the
zman ssrimg
command, view the zman man
page (
man zman
) on the ZENworks Server or see “ Satellite Commands ” in the
ZENworks 10 Configuration Management Command Line Utilities Reference .
The managed device is not promoted to the Imaging Satellite role even though the
role has been assigned to it
Source: ZENworks 10 Configuration Management; Satellite.
Possible Cause: The managed device is unable to contact the Primary Server because of the
firewall settings configured on the managed device.
Action: Do the following on the managed device:
1 Disable the firewall settings.
2 Ping the Primary Server to make sure that the managed device can contact
the server.
3 Refresh the information on the icon by right-clicking the icon, then
clicking
Refresh .
Updated Imaging statistics are not displayed on the ZENworks icon when a Windows
Vista SP2 managed device is promoted to be a Satellite with the Imaging role
Source: ZENworks 10 Configuration Management; Satellite.
Explanation: When you promote a Windows Vista SP2 managed device to be a Satellite
with the Imaging role, any updated Imaging statistics are not displayed on the
icon ( Show Properties > Satellite > Imaging )
Action: To view the latest Imaging statistics on the Satellite:
1 At the console prompt, go to
ZENworks_installation_directory \novell\zenworks\bin\prebo
ot
.