90
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
3
In the
Available Content
list, select the desired content.
You can use Shift+click and Ctrl+click to select multiple bundles or policies.
4
Click
to move the selected content to the
Selected Content
list.
5
Click
Next
.
6
Click
Finish
to create the relationships between the content and the content servers.
Depending on the relationships created, the content is replicated to or removed from content servers
during the next scheduled replication.
7.6 Manually Replicating Content from a Primary
Server to Satellite Devices
You can export content from a ZENworks Primary Server’s content repository and then manually
import that content into a Satellite device’s content repository. This process is sometimes called
offline content replication.
For more information about exporting content from the content repository, see the
zman
satellite-server-export-content (ssec)
command under “
Satellite Commands
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
. After you export the
content, you can copy it to a network drive or to a storage device and then manually import the
content into the Satellite device’s content repository.
For more information about importing the content into a Satellite device’s content repository, see the
zac cdp-import-content (cic)
command under “
Content Distribution Commands
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
You cannot manually export content from one ZENworks Primary Server and then import that
content into another Primary Server. For information about replicating content between Primary
Servers, see
Chapter 29, “Content Replication,” on page 243
.
7.7 Moving a Satellite from One Primary Server
to Another Primary Server
You can move a Satellite from its parent Primary Server to another Primary Server.
1
In ZENworks Control Center, click the
Configuration
tab.
