Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

Page: 347 / 374

Configuring Message Logger Settings 347
n
ov
do
cx (e
n)
16
Ap
ril 20
10
38.2 Configuring the Message Logger Settings at
the Folder Level
By default, the Message Logger settings configured at the zone level are applied to all the managed
devices. However, you can modify the Local Device Logging settings for all the devices within a
folder:
1 In ZENworks Control Center, click Devices .
2 Click the Folder (Details) option for which you want to configure the Message Logger settings.
3 Click Settings , then click Device Management > Local Device Logging .
4 Click Override .
5 Edit the logging settings as required.
6 To apply the changes, click Apply.
or
To revert to the Local Device Logging settings configured at the zone level, click
Revert .
7 Click OK .
38.3 Configuring the Message Logger Settings at
the Device Level
By default, the Message Logger settings configured at the zone level are applied to all the managed
devices. However, you can modify the Local Device Logging settings for the managed device:
1 In ZENworks Control Center, click Devices .
2 Click Servers or Workstations to display the list of managed devices.
3 Click the device for which you want to configure the Message Logger settings.
4
Click Settings , then click Device Management > Local Device Logging .
5 Click Override .
6
Edit the logging settings as required.
7 To apply the changes click Apply.
or
To revert to the Local Device Logging settings configured at the zone level, click
Revert .
8
Click OK .
38.4 Turning on the Debug Messages
To turn on the logging of debug messages for all components:
1 In ZENworks Control Center, click Configuration .
2 In the Management Zone Settings panel, click Device Management , then click Local Device
Logging.
3 In the local file panel, select the Log message to a local file if severity is option, then select the
severity as Debug and above .
4 Click Apply, then click OK .