Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

Page: 91 / 374

Satellites 91
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2 In the Server Hierarchy panel, select the check box next to the Satellite that you want to move,
then click
Move .
3
Select the Primary Server you want to be the Satellite’s new parent, then click OK .
Any content (bundles, policies, and patches) you want hosted on a Satellite with the Content role
must also be hosted on its parent Primary Server. If the content is not hosted on the new Primary
Server, it is added.
7.8 Specifying a Different Repository for the
Content Role Satellite (Windows Only)
The content repository is located in the following default path on Windows Satellites:
installation_path \zenworks\work\content-repo
To change the default path to another location accessible to the server:
1 Make sure that the disk drive you want to use is attached to the Satellite and is properly
formatted.
You do not need to specify a drive letter, but the server must recognize the hardware.
2 Make sure that there is no content in the default location
(
installation_path \zenworks\work\content-repo
) by doing one of the following:
Š
If the
content-repo
directory is not present in the path given above, create the
content-
repo
directory in that path.
Š
If you need to save the content that is now in this directory, rename the existing directory
and create a new empty directory named
content-repo
.
You can later copy the content from the renamed directory to the new content repository
location (see
Step 9 ).
Š
If you do not need any of the content in the existing
content-repo
directory, delete the
directory and re-create the
content-repo
directory.
An empty
content-repo
directory must exist to act as the pointer to the new content
repository location for the Satellite.
3 Click Start , right-click the My Computer icon, then select Manage .
You can also click Start , then enter
compmgmt.msc
at the Run command line.
4 Select Disk Management under the Storage section in the left pane.
The disk drive you selected in Step 1 should be displayed.
5 Right-click the partition of the disk drive that you want to use as your content repository on the
Satellite, then select
Change Driver Letter and Paths .
This is the disk drive (see Step 1 ) that you will mount to the
content-repo
directory.
6 Click Add .
This displays the Add Drive Letter or Path dialog box.
7 Select Mount in the Following Empty NTFS Folder , then browse for and select the
content-
repo
directory:
installation_path \zenworks\work\content-repo
8 Click OK as necessary to exit and save the configuration change.