20
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
3
In the
Password
field, do one of the following:
If you are logging in through the default Administrator account, specify the Administrator
password that you created during installation.
Specify the password for the administrator name that you created in ZENworks Control
Center.
To prevent unauthorized users from gaining access to ZENworks Control Center, the
administrator account is disabled after three unsuccessful login attempts, and a 60-second
timeout is enforced before you can attempt another login. To change these default values, see
Section 1.4, “Changing the Default Login Disable Values,” on page 22
.
4
Click
Login
to display ZENworks Control Center.
To log in again as a different administrator, click the
Logout
option in the upper right corner of the
ZENworks Control Center window, then when the login dialog box is displayed, log in as a different
administrator.
The
Logout
option includes the name of the administrator who is logged in as part of the option. For
example,
Logout John
.
1.2 Accessing ZENworks Control Center through
Novell iManager
ZENworks 10 Configuration Management includes a Novell
®
plug-in module (
.npm
) that you can
use to access ZENworks Control Center from Novell iManager, which is a management console
used by many Novell products.
The ZENworks Control Center plug-in supports iManager 2.7 only. It does not support iManager 2.6
or 2.5; it will install to these versions but does not work.
To install the ZENworks Control Center plug-in for iManager:
1
On the server where iManager is located (or on a device that has access to the iManager server),
open a Web browser to the ZENworks download page:
https://
server
/zenworks-setup
where
server
is the DNS name or IP address of a ZENworks Server.
2
In the left navigation pane, click
Administrative Tools
.
3
Click
zcc.npm
and save the file to a location on the iManager server.
4
Follow the instructions in the
Novell iManager 2.7 Administration Guide
(http://
www.novell.com/documentation/imanager27/imanager_admin_27/data/b8qrsg0.html)
to
install and configure the plug-in module.
5
Log into iManager.
6
Click the ZENworks icon at the top of the page.
7
Enter the ZENworks Control Center URL:
https://
ZENworks_Server_Address
:
port
Replace
ZENworks_Server_Address
with the IP address or DNS name of the ZENworks
Server. You only need to specify the
port
if the ZENworks server is not using the default port
(80 or 443).
8
Click the ZENworks icon to launch ZENworks Control Center.
