External Database Maintenance
323
n
ov
do
cx (e
n)
16
Ap
ril 20
10
4
Start the Novell ZENworks Embedded Datastore service on the database server on which you
restored the backed-up database. If you have restored the backed-up database to a different
device, you must start the service on that device as well as on the database server.
On Windows:
Do the following:
1. From the Windows desktop
Start
menu, click
Settings
>
Control Panel
.
2. Double-click
Administrative Tools
>
Services
.
3. Right-click the
Novell ZENworks Embedded Datastore
service, then click
Start
, or
select the
Novell ZENworks Embedded Datastore
service, then click on the toolbar.
On Linux:
At the console prompt, enter
/etc/init.d/./sybase-asa stop
.
5
On the Primary Server to which the database is registered, start the ZENworks Server service.
On Windows:
Do the following:
1. From the Windows desktop
Start
menu, click
Settings
>
Control Panel
.
2. Double-click
Administrative Tools
>
Services
.
3. Right-click the Novell ZENworks Server service, then click
Start
, or select the
Novell
ZENworks Server
service, then click on the toolbar.
On Linux:
At the console prompt, enter the following commands:
/etc/init.d/./novell-zenserver restart
6
(Conditional) If you restore the database to a location other than the one given in the
zenworks_database.conf
file, you must manually edit the file to specify the new location of
the database. The
zenworks_database.conf
file is located by default in the
zenworks_installation_directory
\novell\zenworks\database\conf\
directory on
Windows and in the
/etc/opt/novell/zenworks/
directory on Linux.
35.3 Moving the Data from One External Sybase
Database to another External Sybase Database
ZENworks 10 Configuration Management allows you move the data from one OEM Sybase
database (external Sybase database) to another external Sybase database.
Section 35.3.1, “Preparing to Move the Data,” on page 323
Section 35.3.2, “Moving the Data from One External Sybase to Another External Sybase,” on
page 324
35.3.1 Preparing to Move the Data
Before moving the data from one external Sybase database to another external Sybase database, do
the following:
Make sure that ZENworks 10 Configuration Management is installed with an external Sybase
database on a Windows or Linux device. The data is moved from this database to another
external database.
Make sure that you have another Windows or Linux device with an external Sybase database
installed. For more information on how to install an external Sybase database, see “
Installing
an External ZENworks Database
” in the
ZENworks 10 Configuration Management Installation
Guide
.
