User Sources
265
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Address:
Specify the IP address or DNS hostname of the server where the LDAP directory
resides.
Use SSL:
Displays
Yes
or
No
, depending on whether the user source uses SSL. You cannot edit
this field.
Port:
This field defaults to the standard SSL port (636) or non-SSL port (389) depending on
whether the user source uses SSL. If your LDAP server is listening on a different port, select
that port number.
Certificate:
If the user source uses SSL, displays the certificate for the user source. You cannot
edit the certificate.
Update:
If the user source uses SSL, click the
Update
button to update the certificate, if a new
certificate exists.
4
Click
OK
.
31.3.3 Removing User Source Connections
1
In ZENworks Control Center, click the
Configuration
tab.
2
In the User Sources panel, click the underlined link for a user source.
3
In the Connections panel, select a connection’s check box.
4
Click
Remove
.
31.3.4 Updating a Certificate for a User Source
A certificate is used to allow secure communication between devices and user sources. If your
certificate expires or you want to change the certificate, you need to update the certificate.
1
In ZENworks Control Center, click the
Configuration
tab.
2
In the User Sources panel, click the user source.
3
In the Connections panel, click a connection to display the Edit Connection Details dialog box.
