134
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
6
(Conditional) If the Primary Server whose DNS name you changed hosts the database, and if
the database server IP address or DNS name has been changed, do the following on all Primary
Servers:
6a
Ensure that the database server IP address or DNS name has been configured correctly in
the
zdm.xml
file, which is located in the
ZENworks_Installation_Directory
\Novell\ZENworks\conf\datamodel\
directory on Windows, and in the
/etc/opt/novell/zenworks/datamodel/
directory
on Linux.
6b
Restart the following services:
Novell ZENworks Server
Novell ZENworks Loader
Novell ZENworks Agent Service
7
Replace the existing certificate with the newly created external certificate on all the devices in
the Management Zone in the order listed below:
1.
“Replacing the Existing Certificate with the New External Certificate on the Primary
Servers” on page 134
2.
“Replacing the Existing Certificate with the New External Certificate on the Satellites” on
page 135
3.
“Replacing the Existing Certificate with the New External Certificate on the Managed
Devices” on page 136
Replacing the Existing Certificate with the New External Certificate on the Primary
Servers
Perform the following tasks on all the Primary Servers in the Management zone whose certificate
you want to change:
1
Reconfigure the certificates on the Primary Server whose IP address and DNS name you
changed in
Step 2 on page 133
by entering the following command at the server’s command
prompt:
novell-zenworks-configure -c SSL -Z
Follow the prompts.
2
Restart all the ZENworks services by running the following command:
novell-zenworks-configure -c Start
By default, all the services are selected. You must select
Restart
as the
Action
.
3
Unregister the ZENworks Adaptive Agent installed on the Primary Server from the
Management Zone by entering the following command at the server’s command prompt:
zac unr -f
For more information about zac, view the zac man page (
man zac
) on the device or see
“
zac(1)
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
4
Clear the ZENworks cache.
On Windows:
Run the following commands:
zac cc
delete
ZENworks_installation_directory
>\Novell\ZENworks\ cache\zmd\ /s
