Configuring Adaptive Agent Settings after Deployment
151
n
ov
do
cx (e
n)
16
Ap
ril 20
10
By default, the
Installed
check boxes for all modules are selected, meaning that all modules are
installed on devices when they register to your ZENworks Management Zone. If you deselect a
module’s
Installed
check box, that module is uninstalled from the device the next time it
refreshes.
3
To enable an installed module, click the
Enabled
button.
or
To disable an installed module, click the
Disabled
button.
By default, the
Enabled
option for all installed modules is selected, meaning that all modules
are enabled on devices. Disabling a module does not cause that module to be uninstalled from
currently managed devices. The module remains installed on the device, but it is disabled.
4
Specify the reboot behavior if a reboot is required.
This option applies only when installing or uninstalling a module. In some cases, Windows
Installer might require a reboot of the device when installing or uninstalling the module. If a
reboot is required during install, the module does not function until the reboot occurs. If a
reboot is required during uninstall, the module’s files are not completely removed until a reboot
occurs, but the module stops functioning.
Prompt user to reboot (Default)
: The user is prompted to reboot the device. The user can
reboot immediately or wait until later.
Do not reboot device
: No reboot occurs. The user must initiate a reboot.
Force device to reboot
: The device is automatically rebooted. The user is notified that the
device will reboot in 5 minutes.
5
Click
Apply
to save the changes.
6
(Conditional) If you install the Remote Management or Image Management module on a
device, reboot the device for the install to be effective.
To understand the effects of enabling, disabling, or uninstalling the modules, see the following
tables:
Table 14-1, “Bundle Management,” on page 152
Table 14-2, “Image Management,” on page 153
Table 14-3, “Patch Management,” on page 154
Table 14-4, “Policy Management,” on page 155
Table 14-5, “Remote Management,” on page 156
