Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

Page: 116 / 374

116 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Add servers to an
L4 switch
definition 1. In the server list, select the
check boxes for the servers
you want to add to the L4
switch definition.
2. Click L4 Switch > Add to L4
Switch Definition .
3. Do one of the following:
Š
To add the selected
servers to a new L4
switch definition, select
Create New and specify
the DNS name or IP
address of the L4 switch,
then click
OK .
Š
To add the selected
servers to an existing L4
switch definition, select
an L4 switch definition
from the list in the
Select
Existing field, then click
OK .
4. Click Apply to make the
change effective.
Reorder the list 1. In the desired server list,
select the check box for the
server, group, or L4 switch you
want to move.
2. Click Move Up or Move Down
as necessary to change its
order in the list.
3. Repeat as necessary to order
the list.
Placement in the list determines the
order in which servers are
contacted. The first list item (server,
group, or L4 switch) is contacted
first, then the second, and so forth.
You can order the items in the lists
differently. This allows you to
spread the workload initiated by
devices by placing different servers
higher in one list than in the other
lists. For example:
Š
Collection Servers: Server1,
Group1, Server3, L4Switch5
Š
Content Servers: L4Switch5,
Server2, Server3, Server1
Š
Configuration Servers:
Server3, Server2, Group1
Š
Authentication Servers:
Group1, L4Switch5, Server1,
Server2
Task Steps Additional Details