Closest Server Rules
115
n
ov
do
cx (e
n)
16
Ap
ril 20
10
8c
(Conditional) If you have ZENworks Servers or Satellites that are clustered behind an L4
switch, you can define the L4 switch and add the servers to the definition. This enables the
L4 switch to continue to balance the traffic among those servers.
Remove a group
1. In the server list, select the
check box for the group you
want to remove.
2. Click
Groups
>
Remove
Group
, then click
OK
.
3. Click
Apply
to make the
change effective.
The group’s servers are not
removed, only the group.
Task
Steps
Additional Details
Create an L4
switch definition
1. In the server list, select the
check boxes for the servers to
include in the L4 switch
definition, then click
L4 Switch
>
Create L4 Switch Definition
from Selection
.
or
If you want to create an empty
L4 switch definition, click
L4
Switch
>
Create Empty
.
You can add servers to the
empty definition later using the
L4 Switch
>
Add to L4 Switch
Definition
option.
2. Specify the DNS name or the
IP address of the L4 switch,
then click
OK
to add the L4
switch to the list.
3. Click
Apply
to make the
change effective.
Task
Steps
Additional Details
