manualshive.com logo in svg

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, System Administration Manual

The Novell ZENworks 10 Configuration Management SP3 - Network Discovery Database Structure is a vital tool for system administrators. This manual provides detailed guidance on configuring and managing network discovery databases. Download the free System Administration Manual from manualshive.com to enhance your network management skills.

Share
Download
background image

Contents

13

n

ov

do

cx (e

n)

  16
 Ap
ril 20

10

36.2.2

Changing the Backup Schedule and Location of the External Sybase Database 
Subsequent to the Initial Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  335

Part X  Message Logging

339

37 Overview

341

37.1 Functionalities of Message Logger  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  341
37.2 Message Severity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  341
37.3 Message Format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  342

38 Configuring Message Logger Settings

343

38.1 Configuring the Message Logger Settings at the Zone Level  . . . . . . . . . . . . . . . . . . . . . . . .  343

38.1.1

Local Device Logging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  343

38.1.2

Centralized Message Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  344

38.2 Configuring the Message Logger Settings at the Folder Level  . . . . . . . . . . . . . . . . . . . . . . .  347
38.3 Configuring the Message Logger Settings at the Device Level   . . . . . . . . . . . . . . . . . . . . . .  347
38.4 Turning on the Debug Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  347

39 Managing Messages

349

39.1 Understanding Message Formats  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  349

39.1.1

Local Log File Format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  349

39.1.2

E-Mail Format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  350

39.1.3

SNMP Message Format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  350

39.1.4

UDP Payload Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  351

39.2 Viewing the Message Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

39.2.1

Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  352

39.2.2

Device Hot List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353

39.3 Viewing the Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  353

39.3.1

Message Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  353

39.3.2

System Message Log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  354

39.4 Acknowledging Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355

39.4.1

Acknowledging a Message  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  355

39.4.2

Acknowledging Multiple Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  355

39.4.3

Acknowledging Messages Logged During a Specified Time  . . . . . . . . . . . . . . . . .  356

39.5 Deleting Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  357

39.5.1

Deleting a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  357

39.5.2

Deleting Multiple Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  357

39.5.3

Deleting Messages Logged During a Specified Time . . . . . . . . . . . . . . . . . . . . . . .  358

39.6 Viewing the Predefined Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358

A Naming Conventions in ZENworks Control Center

361

B Schedule Types

363

B.1

Date Specific  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  363

B.2

Event  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  364

B.3

Now  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  365

B.4

Recurring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  365

Summary of Contents for ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE























































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE

Yamaha DM 1000 Manual preview
DM 1000
Brand: Yamaha Pages: 30
MACROMEDIA COLDFUSION MX 61-CFML Quick Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 34
Red Hat NETWORK SATELLITE SERVER 4.0.5 Installation Manual preview
NETWORK SATELLITE SERVER 4.0.5
Brand: Red Hat Pages: 82
Davis Instruments GroWeatherLink User Manual preview
GroWeatherLink
Brand: Davis Instruments Pages: 108
CA BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9... Manual preview
BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...
Brand: CA Pages: 69
COMPRO COMPRODVD2 User Manual preview
COMPRODVD2
Brand: COMPRO Pages: 18
Model Technology Model Sim EE Start Here Manual preview
Model Sim EE
Brand: Model Technology Pages: 37
Omron WS02-NCTC1-E - 07-2001 Operation Manual preview
WS02-NCTC1-E - 07-2001
Brand: Omron Pages: 116
Blackberry TICKETMASTER - LEARN MORE User Manual preview
TICKETMASTER - LEARN MORE
Brand: Blackberry Pages: 7
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
ICP GDT monitor Manual preview
GDT monitor
Brand: ICP Pages: 60
Symantec ALTIRIS 6 INVENTORY SOLUTION Datasheet preview
ALTIRIS 6 INVENTORY SOLUTION
Brand: Symantec Pages: 2
Euphonix MixView 3.0 Overview preview
MixView 3.0
Brand: Euphonix Pages: 8
Aastra MX-ONE 4.2 User Manual preview
MX-ONE 4.2
Brand: Aastra Pages: 46
Philips SA2SONGBRD/00 User Manual preview
SA2SONGBRD/00
Brand: Philips Pages: 18
Pioneer CNSD-239FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-239FM
Brand: Pioneer Pages: 28
Pioneer CNSD-230FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-230FM
Brand: Pioneer Pages: 28
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2

Brands by name

Popular brands

Load more brands