Disaster Recovery
129
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Embedded Database:
For detailed information on how to take a backup of the embedded
database, see
Section 34.3, “Backing Up the Embedded Sybase SQL Anywhere
Database,” on page 295
.
2
Create a Certificate Signing Request (CSR) by providing the hostname of the Primary Server as
the subject.
For more information on how to create a CSR, see “
Creating an External Certificate Authority
”
in the
ZENworks 10 Configuration Management Installation Guide
.
3
Replace the existing certificate with the newly created external certificate on all the devices in
the Management Zone in the order listed below:
1.
“Replacing the Existing Certificate with the New External Certificate on the Primary
Servers” on page 129
2.
“Replacing the Existing Certificate with the New External Certificate on the Satellites” on
page 130
3.
“Replacing the Existing Certificate with the New External Certificate on the Managed
Devices” on page 131
Replacing the Existing Certificate with the New External Certificate on the Primary
Servers
Perform the following tasks on all the Primary Servers in the Management zone whose certificate
you want to change:
1
Reconfigure the certificates on the Primary Server whose IP address and DNS name you
changed in
Step 2
by entering the following command at the server’s command prompt:
novell-zenworks-configure -c SSL -Z
Follow the prompts.
2
Restart all the ZENworks services by running the following command:
novell-zenworks-configure -c Start
By default, all the services are selected. You must select
Restart
as the
Action
.
3
Unregister the ZENworks Adaptive Agent installed on the Primary Server from the
Management Zone by entering the following command at the server’s command prompt:
zac unr -f
For more information about zac, view the zac man page (
man zac
) on the device or see
“
zac(1)
” in the
ZENworks 10 Configuration Management Command Line Utilities Reference
.
4
Clear the ZENworks cache.
On Windows:
Run the following commands:
zac cc
delete
ZENworks_installation_directory
>\Novell\ZENworks\ cache\zmd\ /s
On Linux:
Run the following commands:
zac cc
rm -rf /var/opt/novell/zenworks/zmd/cache
5
Restart the ZENworks Adaptive Agent Service.
6
Register the ZENworks Adaptive Agent installed on the Primary Server to the correct Primary
Server by entering the following command at the device’s command prompt:
