248
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
If you have only one ZENworks Server in your Management Zone, you can’t exclude the
content from it.
You can’t include a Satellite devices without first including the Satellite devices’s parent
ZENworks Server.
5
(Optional) Click
Force Inheritance
in the
Folder Task
list in the left navigation pane to ensure
that all children (all subfolders as well as individual bundles and policies) inherit the settings.
29.4.3 Managing Multiple Pieces of Content on a Single
Content Server
This section provides instructions for managing the replication of the content for multiple bundles or
policies to a single content servers.
1
In ZENworks Control Center, go to the details page for the content server whose content
replication you want to manage.
2
Click the
Content
tab.
The Replication Settings panel displays all bundles and policies in the zone. If the bundle or
policy content is included on the content server, the
Included
column displays a icon.
3
To change the replication status for a bundle or policy, select the check box next to the bundle
or policy, then click
Include
to include its content on the server, or click
Exclude
to exclude its
content from the server.
As you include or exclude content from the server, be aware of the following replication rules:
If a ZENworks Server is the parent server for one or more Satellite devices, you can’t
exclude the content from the ZENworks Server without first excluding it from the Satellite
devices.
If you have only one ZENworks Server in your Management Zone, you can’t exclude the
content from it.
You can’t include a Satellite devices without first including the Satellite devices’s parent
ZENworks Server.
29.4.4 Managing Multiple Pieces of Content on Multiple
Content Servers
You can use the Specify Content Wizard to include or exclude multiple pieces of content on multiple
content servers. For example, you might have four bundles that you want included on only two of
your four content servers. Rather than managing the replication for the individual bundles (see
Section 29.4.1, “Managing a Single Piece of Content on Multiple Content Servers,” on page 247
) or
the individual content servers (see
Section 29.4.3, “Managing Multiple Pieces of Content on a
Single Content Server,” on page 248
), you can use the wizard to manage the replication for all four
bundles and content servers at one time.
1
In ZENworks Control Center, click the
Devices
tab, then click the
Servers
folder to open it.
2
In the
Server Tasks
list in the left navigation pane, click
Specify Content
to launch the wizard.
3
Follow the prompts to complete the wizard.
