188
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2b
Click
Add
, browse for and select the devices, then click
OK
.
You can add individual devices or device groups, or any combination of them.
You can have both managed servers and workstations in the same deployment stage or in
different stages, or you can split your servers and workstations into separate deployment
stages.
IMPORTANT:
Some of your network servers will be Primary Servers for use in
ZENworks management, while other servers on your network might only be managed
devices with the ZENworks Adaptive Agent installed on them.
You must update your Primary Servers before updating any of the other managed servers
and especially before updating any managed workstations.
2c
Repeat
Step 2b
until you are finished adding members to the stage.
2d
To add members to another stage, repeat
Step 2a
through
Step 2c
.
3
(Optional) Remove devices from a deployment stage:
3a
In the
Stage Members
column, click
View/Modify Members
for the stage for which you
want to remove members.
3b
Select the check box next one or more devices that you want to remove, then click
Remove
.
4
Click
OK
when you have finished configuring the stage’s membership.
20.2.7 Renaming a Deployment Stage
1
In ZENworks Control Center, click
Configuration
in the left pane, then click the
System
Updates
tab.
2
In the Deployment Stages panel, click the check box for the deployment stage to be renamed.
3
Click
Rename
.
4
In the Rename dialog box, specify the new name, then click
OK
.
For information about naming in ZENworks Control Center, see
Appendix A, “Naming
Conventions in ZENworks Control Center,” on page 361
.
