Configuring Updates
177
n
ov
do
cx (e
n)
16
Ap
ril 20
10
20.1.3 E-Mail Notification
In conjunction with
using stages
, you can set up e-mail notifications to indicate when each stage has
completed. When you deploy an update, you can specify to use the e-mail notifications.
1
In ZENworks Control Center, click
Configuration
in the left pane, then click the
Configuration
tab.
2
Click
Management Zone Settings
to expand its options, click
Events and Messaging
, then select
SMTP Settings
to display the E-mail Notification panel:
Staging must be used to receive notifications, and the stage behavior must be set to one of the
following:
Advance Through Stage Automatically With Notification
Advance To Next Stage and Notify When Complete
SMTP must be configured in order for the staging e-mail configuration to work.
3
(Conditional) If you do not have SMTP configured:
3a
To access the SMTP Settings page, click
Configuration
in the left pane, click the arrows in
the
Management Zone Settings
heading to expand its options, click
Event and Messaging
,
then select
SMTP Settings
.
3b
In the
E-mail Notification
section, fill in the fields:
SMTP Server Address:
Specify the DNS name or IP address of the SMTP server.
SMTP Port:
Specify the SMTP server’s communication port.
Use SSL:
To use an encrypted SSL channel for sending e-mails. By default this option is
disabled.
SMTP Server Requires Authentication:
If authentication is required, select this check
box, then specify the
User
and
Password
information.
3c
Click
OK
to save the changes.
