Naming Conventions in ZENworks Control Center
A
361
n
ov
do
cx (e
n)
16
Ap
ril 20
10
A
Naming Conventions in ZENworks
Control Center
When you name an object in the ZENworks
®
Control Center (folders, bundles, policies, groups,
registration keys, and so forth), ensure that the name adheres to the following conventions:
The name must be unique in the folder.
Depending on the database being used for the ZENworks database, uppercase and lowercase
letters might not create uniqueness for the same name. The embedded database included with
ZENworks 10 Configuration Management is case insensitive, so Folder 1 and FOLDER 1 are
the same name and cannot be used in the same folder. If you use an external database that is
case-sensitive, Folder 1 and FOLDER 1 are unique.
If you use spaces, you must enclose the name in quotes when entering it on the command line.
For example, you must enclose reg key 1 in quotes (“reg key 1”) when entering it in the zman
utility.
The following characters are invalid and cannot be used: / \ * ? : " ' < > | ` % ~
