254
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
ZENworks Server. By selecting this option, the device waits a randomly generated
amount of time before initiating its refresh. Use the
Minimum
and
Maximum
fields to
specify the range (in seconds) for the randomly generated time.
Partial Refresh Schedule:
Defines how often you want a device to update its policy,
configuration setting, and registration information from the ZENworks Server. Bundle
information is not updated.
In the
Days
,
Hours
, and
Minutes
fields, specify the amount of time between refreshes. For
example, to set a refresh interval of 3 hours, you would specify 0 Days, 3 Hours, 0
Minutes. The default is 2 hours.
The
Timed Refresh
setting is applicable to both the full and partial refreshes.
The refresh interval is not reset until the device refresh is complete. For example, assume you
set a refresh interval of 8 hours. The device’s first refresh occurs at 6:00 p.m. and takes 13
seconds to complete. The second refresh occurs at 2:00:13 a.m. (8 hours after the refresh was
completed at 6:00:13). If the second refresh takes 15 seconds to complete, the third refresh
occurs at 10:00:28 a.m.
4
When you are finished, click
OK
or
Apply
to save the schedule.
