ZENworks Control Center
25
n
ov
do
cx (e
n)
16
Ap
ril 20
10
If you are logged in to ZENworks Control Center when you click a bookmark, the location is
immediately displayed.
If you are not logged in to ZCC when you click a bookmark, the Login dialog box is displayed. After
you enter valid credentials, the location is immediately displayed.
To create bookmarks:
1
In ZENworks Control Center, navigate to a location where you want to create a bookmark.
2
Click .
This opens the following dialog box, where the URL to the current location is already selected:
3
Press Ctrl+C to copy the URL, then click
OK
to close the dialog box.
4
Paste the URL as a new bookmark in your Web browser.
1.8 Troubleshooting ZENworks Control Center
“An HTTP request is not redirected to HTTPS if IIS is running on the Primary Server” on
page 25
An HTTP request is not redirected to HTTPS if IIS is running on the Primary Server
Source: ZENworks 10 Configuration Management; ZENworks Control Center.
Explanation: During installation, the setup checks to see if the default HTTP port (80) and
HTTPS port (443) are in use. If the ports are in use by another application
(such as IIS), you are prompted to use alternative ports. In this case, you must
access ZENworks Control Center via the port it is using and not access IIS.
Action: Although http://
Primary_Server_IP_address
works if ZENworks Control
Center is using port 80, http://
Primary_Server_IP_address
:### (where ### is
the port Tomcat is using) always works.