232
ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Inventory Only Schedule:
Configure when to run an Inventory Only scan. For more information,
see
Inventory Only Schedule (../../resources/help/settings_sysumischedule.html)
.
Inventory Only Reconciliation:
Control whether and how new workstations are reconciled to
avoid the possibility of duplicates in the database. When a scan is made of a workstation that is new
to the Management Zone, it is assigned an identifier. If the identifier is lost, such as by a disk crash,
it is assigned a new identifier during the next scan. Reconciliation allows you to check whether the
workstation is already in the database. If it is, the identifier in the database is changed to match the
new identifier. For more information, see
Inventory Only Reconciliation (../../resources/help/
settings_sysinventoryreconcile.html)
.
27.8 Reporting Services Settings
The Reporting Services section contains the following settings:
E-mail Notification Settings:
Configure the ZENworks Reporting Server for sending e-mail
notifications to the ZENworks administrator. For more information, see
E-mail Notification Settings
(../../resources/help/cfg_mzset_reptsvr_set.html)
.
Folder Sync Schedule:
Define the refresh interval when the Custom Report folders that are created
in the ZENworks Reporting Server InfoView must synchronize with the ZENworks Control Center.
For more information, see
Folder Sync Schedule (../../resources/help/cfg_report_foldersync.html)
.
Reset the Passphrase of the ZENworks Reporting Server:
Allow the user to reset the Passphrase
of the ZENworks Reporting Server. For more information, see
Reset the Passphrase (../../resources/
help/cfg_report_resetpassphrase.html)
.
File Location Notification Settings:
Specify the destination directory for the report instances on
the ZENworks Reporting Server or on any other remote server. For more information, see
File
Location Notification Settings (../../resources/help/cfg_report_filelocsettings.html)
.
FTP Server Notification Settings:
Specify the destination on the FTP server where you want to
transfer the reporting instances. For more information, see
FTP Server Notification Settings (../../
resources/help/cfg_report_ftpsrvrsettings.html)
.
27.9 Asset Management Settings
The Asset Management section contains the following settings:
Reports:
Configure report settings for Asset Management. For more information, see
Reports (../../
resources/help/settings_sysamreport.html)
.
Compliance:
Set the time of day that license compliance data is refreshed. For more information,
see
Compliance (../../resources/help/settings_sysamcompliance.html)
.
Usage Monitoring:
Enable software usage monitoring. For more information, see
Usage
Monitoring (../../resources/help/am_usagemonitor.html)
.
Usage Display:
Configure whether or not usage data is displayed on License Management pages
(Asset Management > License Management tab) in the ZENworks Control Center. For more
information, see
Usage Display (../../resources/help/am_usagedisplay.html)
.
