MAC215990
61
Revision A
1019711
A
B
Figure 3.42: Float Lock Handle
3.
Engage the float locks by pulling each float lock handle (A)
away from the float module and setting it in locked
position (B).
NOTE:
The illustration at the right shows the right side of the
header. The float lock on the left side of the header is
opposite.
1001472
A
Figure 3.43: Driveline
4.
Disconnect driveline from the combine. Push back collar on
the end of the driveline and pull the driveline out of
combine output shaft (A) until the collar disengages.
