MAC215990
141
Revision A
A
1035850
Figure 3.151: Reel Height Sensor Location
3.
On the right endsheet, locate reel height sensor (A). It
connects to the right reel arm.
1035953
A
B
C
C
D
D
Figure 3.152: Sensor Arm/Pointer Configurations
A - Incorrect Configuration
B - Case/New Holland Configuration
C - Sensor Arm
D - Sensor Pointer (Located Between Sensor and Sensor Arm)
4.
Ensure that sensor arm (C) and pointer (D) are configured properly for the header. For instructions, refer to
Figure
NOTE:
In configuration
A
, the arrow indicates that the pointed end of the sensor arm is pointed toward the back of the
header.
In configuration
B
, the arrow indicates that the pointed end of the sensor arm is pointed toward the front of the
header.
5.
If the sensor arm orientation is incorrect, remove sensor arm (C) and reposition it in the correct orientation. Torque
the nut to 8.2 Nm (72.5 lbf·in).
