MAC215990
344
Revision A
1028369
A
Figure 4.176: Feed Deck Pan
4.
Lower feed deck pan (A).
NOTE:
Lowering the feed deck pan improves access to the
hardware securing the feed draper.
5.
Raise the header fully.
6.
Raise the reel fully.
7.
Shut down the engine, and remove the key from the ignition.
8.
Engage the header safety props. For instructions, refer to the combine operator
’
s manual.
9.
Engage the reel safety props. For instructions, refer to
Engaging Reel Safety Props, page 37
.
ϭϬϯϴϰϵϴ
A
A
A
B
A
B
C
D
Figure 4.177: Draper Seal
10. Remove five countersunk screws (A) and retainer (B).
11. Remove one button head screw and washer (C).
12. Flip mid-filler (D) over.
13. Repeat Steps
to
on the other
side of the feed deck.
B
1027877
A
Figure 4.178: Feed Draper Tensioner
14. Locate the feed draper tensioner. Loosen jam nut (A). Turn
bolt (B) counterclockwise to relieve the tension on the
draper.
15. Repeat the previous step on the right side of the deck.
16. Move the idler roller back inside the cutout in the frame.
