MAC215990
324
Revision A
1.
Raise the reel fully.
2.
Shut down the engine, and remove the key from the ignition.
3.
Engage the reel safety props. For instructions, refer to
Engaging Reel Safety Props, page 37
.
1028434
A
B
C
Figure 4.144: Pointed Center Knife Guard
4.
Remove two nuts and bolts (C) securing guard (A) and hold-
down (B) to the cutterbar.
5.
Remove guard (A), plastic wearplate, and hold-down (B).
1028440
A
Figure 4.145: Pointed Center Knife Guard
IMPORTANT:
Ensure the replacement guard is the correct guard with
offset cutting surfaces (A).
1029116
A
Figure 4.146: Cutterbar
6.
Before installing the new pointed center knife guard,
ensure overlap shim (A) is present under the cutterbar, and
the thick end of the shim is positioned under the center
guard.
