MAC215990
271
Revision A
4.5
Electrical System
The electrical system for the header is powered by the combine. The header has various lights and sensors that
require power.
4.5.1
Replacing Light Bulbs
Lights are an important safety feature. Replace damaged or malfunctioning bulbs or lamps immediately.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
Use bulb trade #1156 for amber transport lights and #1157 for the red tail light (Slow Speed Transport option).
Clearance Lights (North America Only)
1029253
A
Figure 4.38: Left Clearance Light
1.
Use a Phillips screwdriver to remove the three screws (A)
from the fixture, and remove the plastic lens. Retain
screws (A).
2.
Replace the bulb, and reinstall the plastic lens and screws.
Slow Speed Transport Lights
1029252
A
Figure 4.39: Optional Slow Speed Transport
–
Red and
Amber Lights
3.
Use a Phillips screwdriver to remove screws (A) from the
fixture, and remove the plastic lens. Retain screws (A).
4.
Replace the bulb, and reinstall the plastic lens and screws.
