MAC215990
380
Revision A
1026935
B
C
D
A
Figure 4.253: Idler Roller
11. Remove bolt (A) and washer from the idler roller at the
back of the header deck.
12. Remove bolt (B) and washer from the idler roller at the
front of the header deck.
13. Spread roller arms (C) and (D), and remove the idler roller.
4.12.8
Replacing Side Draper Deck Idler Roller Bearing
The side draper deck idlers rollers have bearings installed to allow the roller to turn.
1.
Remove draper deck idler roller. For instructions, refer to
4.12.7 Removing Side Draper Deck Idler Roller, page 378
.
1023314
A
B
C
Figure 4.254: Idler Roller Bearing and Seal
2.
Clamp idler roller (A) in a vise with cloth wrapped around
the roller to prevent damage to the roller.
3.
Use a slide hammer to remove bearing assembly (B) and
seal (C) from the roller.
1023312
A
B
Figure 4.255: Idler Roller
IMPORTANT:
When installing the new bearing, do
NOT
place the end of the
roller directly onto the ground. Bearing assembly (A) protrudes
past roller tube (B), and placing the end on the ground will push
the bearing farther into the tube.
