MAC215990
343
Revision A
4.10 Feed Deck
The feed deck is located on the FM200 Float Module. It consists of a motor and feed draper that conveys cut crop to the
feed auger.
4.10.1
Replacing Feed Draper
The feed draper on the float module delivers harvested crop into the combine
’
s feeder house. If the feed draper is torn,
cracked, or missing slats, it will need to be replaced.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and
remove the key before leaving the operator
’
s seat, and always engage the safety props before going under the
machine for any reason.
1028363
A
B
Figure 4.174: Underside of Feed Deck
1.
On the underside of the feed deck, rotate latch (A) to
unlock handle (B).
2.
Repeat the previous step on the other side of the
feed deck.
1028364
A
B
Figure 4.175: Underside of Feed Deck
3.
Hold pan (A) and rotate handle (B) downward to release
the pan.
