MAC215990
265
Revision A
A
B
ϭϬϯϴϴϵϵ
Figure 4.31: Header Drive Completion Gearbox
3.
Remove oil level plug (A) from the completion gearbox. The
oil should be at the level of the port.
4.
If there is an insufficient amount of oil in the completion
gearbox, add oil through filler plug (B). For instructions,
refer to
Adding Oil to Header Drive Completion Gearbox,
5.
Reinstall oil level plug (A).
Adding Oil to Header Drive Completion Gearbox
The completion gearbox includes fill, check, and drain plugs for quickly checking and servicing the gear lubricant while
mounted to the float module.
DANGER
To prevent injury or death from the unexpected start-up of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the cutterbar to the ground, and ensure the completion gearbox is in working position.
2.
Shut down the engine, and remove the key from the ignition.
