MAC215990
160
Revision A
1033871
C D
A
E
B
Figure 3.185: Crop Divider with Latch
5.
Remove lynch pin (A).
6.
Hold onto crop divider (E).
7.
Rotate hex shaft (B) on divider latch (C) forward to
disengage it from bolt (D).
1029302
A
Figure 3.186: Crop Divider with Latch
8.
Lower crop divider (A), and remove it from the endsheet.
9.
Close the endshield. For instructions, refer to
1029353
A
B
Figure 3.187: Optional Crop Divider Storage
10. If installed, place crop divider (A) onto optional storage
position on bracket (B).
11. If not installed, place crop dividers in a safe location.
Installing Crop Dividers
Follow these instructions to properly instal the crop dividers.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
