MAC215990
97
Revision A
1034027
A
A
Figure 3.76: Ultra Wide Configuration
To convert to Wide Configuration from Ultra Wide
Configuration:
One flighting kits (MAC357233 or B7344
52
) is required. You will
need to install two short flightings onto the existing welded
flightings (A). A total of 30 auger fingers is recommended for
this configuration.
•
For flighting installation instructions, refer to
•
If required to remove auger fingers, refer to
1033386
1
2
A
A
A
A
3
B
B
A
A
Figure 3.77: Auger Configurations
–
Rear View
1 - Narrow Configuration
2 - Ultra Narrow Configuration
3 - Wide Configuration
To convert to Wide Configuration from Narrow or Ultra
Narrow Configuration:
One flighting kit (MAC357233 or B7344
) is required. You will
need to replace existing long flightings (A)
53
with short
flightings (B) and install additional auger fingers. A total of 30
auger fingers is recommended for this configuration.
•
For flighting replacement instructions, refer to
and
.
•
For finger installation instructions, refer to
52. MAC357233 is available only through MacDon Parts. B7344 is available only through Whole Goods. Both kits contain
wear-resistant flightings.
53. The quantity of existing long flightings is either 4 or 8, depending on the current configuration.
