MAC215990
128
Revision A
1029057
A
B
Figure 3.132: Header Float Lock in Locked Position
5.
Lock the header float by pulling the float lock handle into
position (A) on the left side of the float module.
NOTE:
The float is unlocked when the handle is in position (B).
6.
Repeat the previous step to set the float lock handle on the
other side of the float module.
1031580
A
B
C
C
A
B
Figure 3.133: Left Float Adjustment
7.
Access float spring adjustment bolts (A) by loosening
bolts (C) and rotating spring locks (B) forward.
8.
Loosen adjustment bolts (A) by making small adjustments
to each bolt, one after the other, in identical increments,
until the springs are loose.
NOTE:
The adjustment bolts will rise slightly above the washers
when the springs are loose.
