MAC215990
374
Revision A
1032731
A
B
C
Figure 4.241: Draper Seal
2.
Check that clearance (A) between draper (B) and metal
seal (C) is 0
–
2 mm (0.004
–
0.08 in.).
3.
Relieve the tension on the draper. For instructions, refer to
4.12.4 Adjusting Side Draper Tension, page 375
.
1009729
A
B
Figure 4.242: Deck Support
4.
Lift front edge of draper (A) past cutterbar (B) to expose the
deck support.
5.
Measure and note the thickness of the draper belt.
1003841
A
B
C
Figure 4.243: Deck Support
NOTE:
The deck is shown with the draper removed.
6.
Loosen two lock nuts (A) on deck support (B) one
half-turn
ONLY
.
7.
Tap deck (C) with a hammer and block of wood to lower
the deck relative to the deck supports. Tap deck support (B)
using a punch to raise the deck relative to the deck
supports.
Number of Deck Supports (B)
Model
Quantity
6.1 m (20 ft.)
4
7.6
–
9.1 m (25
–
30 ft.)
6
10.7
–
12.2 m (35
–
40 ft.)
8
13.7 m (45 ft.)
10
